Boiler Tube - LAISTEEL-One Stop Pipe Solutions | Custom Seamless and Welded Steel Pipe & Fire Pipe Manufacturer

ASTM A210 Alloy Steel Pipes Boiler Tubes Wholesaler

Sun, 20 Aug 2023 19:17:36 +0000

ASTM A210 Alloy Boiler Tubes

ASTM A210 / A210M, ASME SA210 / SA210M Grade A-1 is the standard applicable to Seamless Medium-Carbon Steel Boiler and Superheater Tubes.

Application

Production Process Introduction

Cold Drawn Seamless Mechanical Tubing (CDS) is a cold drawn 1018/1026 steel tube which offers uniform tolerances, enhanced machinability and increased strength and tolerances compared to hot-rolled products. Produced from hot rolled 1026, the cold drawing process increases the tube’s physical properties and offers better tolerances and reduced machining allowances over hot finish seamless. CDS seamless tube and pipe is produced by piercing hot billets and subsequent rolling which reduces their diameter and elongates them. This material is then passed through a die and over a mandrel plug to produce an accurate size and gauge which is the essence of the cold drawing process.

Example Size

Note: Some of the main specifications are shown below, please contact us for more details.

Out Diameter		Wall Thickness
Inch	mm	mm
1/4″	6.35	0.51/ 0.89/ 1.24/ 1.64
1″	25.4	1.24/ 1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96
2″	50.8	1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53
3″	76.2	1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53
4 3/4″	120.65	5.56/ 6.35/ 7.14/ 7.95/ 9.53

One-stop service to facilitate your purchase

The Lai Group continues to provide service and support after your purchase. To save you time, we offer you numerous value-added services such as processing, logistics management and testing.

Processing Services:

For more information, please contact our service team.

The post ASTM A210 Alloy Steel Pipes Boiler Tubes Wholesaler first appeared on LAISTEEL-One Stop Pipe Solutions | Custom Seamless and Welded Steel Pipe & Fire Pipe Manufacturer.

]]>

ASTM A192 Boiler Tubes Alloy Cold-drawing Steel Pipe Factory

Fri, 18 Aug 2023 01:49:21 +0000

ASTM A192 Boiler Tubes

Heat Treatment:
1) Hot Rolled tubes need not be heat treated.
2) Cold Drawn tubes shall be heat treated after the final cold-finishing at a temperature of 1200°F [650°C] or higher.

Standard Specification:
ASTM:American Society for Testing and Materials
ASME:American Society of Mechanical Engineers
ASTM A192 and ASME SA192, are universal and can be interused, and the contents inside are the same.

Application

ASTM A192 / ASME SA192 is a high pressure seamless carbon steel / manganese boiler tube(working pressure does not exceed 9.8Mpa and the working temperature between 450 ℃ -650 ℃) used in super heaters, water wall panels, heat exchangers, condensers, marine application, refineries, paper pulping, petrochemical applications, pressure vessels, and general engineering applications.

Production Process Introduction

Example Size

Note: Some of the main specifications are shown below, please contact us for more details.

Out Diameter		Wall Thickness
Inch	mm	mm
1/4″	6.35	0.51/ 0.89/ 1.24/ 1.64
1″	25.4	1.24/ 1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96
2″	50.8	1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53
3″	76.2	1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53
4 3/4″	120.65	5.56/ 6.35/ 7.14/ 7.95/ 9.53

One-stop service to facilitate your purchase

The Lai Group continues to provide service and support after your purchase. To save you time, we offer you numerous value-added services such as processing, logistics management and testing.

Processing Services:

For more information, please contact our service team.

The post ASTM A192 Boiler Tubes Alloy Cold-drawing Steel Pipe Factory first appeared on LAISTEEL-One Stop Pipe Solutions | Custom Seamless and Welded Steel Pipe & Fire Pipe Manufacturer.

]]>

ASTM A179 Alloy Steel Pipe Cold-drawing Boiler Tubes Supplier

Fri, 18 Aug 2023 01:28:33 +0000

ASTM A179 Seamless Carbon Steel Tubes

ASTM A179 or ASME SA179 tubes is a type of seamless pipe material in carbon, with small wall thickness and diameters. (Most is required below 3 inch.)
It covers seamless cold drawn low carbon steel pipe, for tubular heat exchanger, condensers and other similar heat transfer equipment.

Application

ASTM A179 alloy steel piep usually used in high temperature boiler tubes.

Production Process Introduction

CDS seamless tube and pipe is produced by piercing hot billets and subsequent rolling which reduces their diameter and elongates them. This material is then passed through a die and over a mandrel plug to produce an accurate size and gauge which is the essence of the cold drawing process.

Example Size

Note: Some of the main specifications are shown below, please contact us for more details.

Out Diameter		Wall Thickness
Inch	mm	mm
1/4″	6.35	0.51/ 0.89/ 1.24/ 1.64
1″	25.4	1.24/ 1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96
2″	50.8	1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53
3″	76.2	1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53
4 3/4″	120.65	5.56/ 6.35/ 7.14/ 7.95/ 9.53

One-stop service to facilitate your purchase

The Lai Group continues to provide service and support after your purchase. To save you time, we offer you numerous value-added services such as processing, logistics management and testing.

Processing Services:

For more information, please contact our service team.

The post ASTM A179 Alloy Steel Pipe Cold-drawing Boiler Tubes Supplier first appeared on LAISTEEL-One Stop Pipe Solutions | Custom Seamless and Welded Steel Pipe & Fire Pipe Manufacturer.

]]>